MANNOL 9801 Headlight Polish Restoration System

Interior and exterior restoration systems

Headlight Polish-professional set for polishing damaged plastic glasses of all types and purposes. Designed specifically for manual and mechanical polishing of scratched, clouded or yellowed plastic headlights and other lighting devices without dismantling them, as well as windshields of motor vehicles and small vessels (boats, motor boats, jet skis, etc.) and motorcycle helmet windows.
Fragments of the road surface, dirt, salt and reagents, insects, ultraviolet light and other weather factors damage the surface of the headlights, making it cloudy over time and poorly transmitting light, which significantly impairs visibility. Therefore, the surface of the headlights must be periodically polished.

Properties:
- Easy and fast application. On average, it takes 30 minutes to process a single headlight;
- Allows you to achieve an ideal degree of surface polishing;
- Restores the brightness of the headlights, increasing visibility and driving up safety and gives the car a more attractive appearance.

Application:
Clean the surface to be treated with water. Use adhesive tape to protect the surrounding surfaces. Wet the surface and polish evenly in a circular motion. Follow the order of grinding wheels 800 → 1200 → 2000. Use each circle for a few minutes. Then polish with a polishing sponge (orange) and sanding paste until the surface is glossy and transparent. Clean and dry the headlight thoroughly. Apply a UV-protecting nano-sealant to the finishing sponge (white) and polish for 1 minute. Let it dry for 2 hours.

The kit includes:
- self - locking sanding disc (for power tools) - 1 PC.
- grinding wheel 2000 - 2 PCs.
- grinding wheel 1200 - 2 PCs.
- grinding wheel 800 - 2 PCs.
- adhesive tape 3000 x 20 mm - 1 PC.
- sanding paste 40 g - 2 PCs.
- polishing sponge (orange) - 1 PC.
- sponge for finishing polishing (white) - 1 PC.
- nano-sealant that protects against UV rays (7.5 ml) - 2 PCs.

Application:
Clean surface to be treated with water. Use masking tape to protect adjacent surfaces.
Moisten the surface and sand down evenly. Observe the order of the sanding discs 800 → 1200 → 2000 and use every grain size for several minutes.
Polish the surface until it is glossy transparent by using the polishing sponge (orange) and the polish. Clean and thoroughly dry off the headlight.
Apply the nano sealant UV protection to the finishing sponge (white) and polish in for 1 min. Leave to dry for 2 hours in the open sun.

Contents:

1 pc. Grinding disc with hook and loop fastener (e.g. for electric screwdrivers)

2 pcs. Sanding disc 2000

2 pcs. Sanding disc 1200

2 pcs. Sanding disc 800

1 pc. Masking tape 3000 x 20 mm

2 pcs. Grinding paste 40 g

1 pc. Polishing sponge (orange)

1 pc. Finishing sponge (white)

2 pc. Nano sealant UV protection 7.5 ml

Volume/weight:
1 set (9801)