Products
Aerotech Flat serie
Windscreen wipers SCT-GERMANY series AEROTECH FLAT
Air filters
The most important purpose of the air filter is to guarantee the enough protection of the engine against the probable abrasion in all of the dusty surroundings. The dust holding capacity of the air filter must be suitable.
The most considerable part of the air filter is the filter element that consists of high grade cellulose fibres. The other important part in panel and circular type filters is polyurethane.
By a very little strength to air flow, air filter holds micro-particles and dust.
Because of being small and light they can be attached under all type of the engine bonnet. The service is easy and cheap.
Heavy duty air filters are used in too dusty surroundings especially in the work vehicles. By means of heavy duty air filters the vehicles that have powerful engines can not be effected from dust environments, so there will be no problem in the working conditions of the vehicle because of high combustion efficiency of the air in the system. Sport air filter
SCT-Vertriebs GmbH developed special air filter for sport/racing cars. This special design permits very high flow rates, minimum restriction and maximum filtration, and very long filter life as well.
Disc brake pads
SCT-Brake Pads are spare part pads with excellent price-quality ratio. The raw materials used in manufacturing of brake pads are chosen according following features: stability, efficiency and capacity of braking. The purpose is to offer a complete range of cost-efficient brake pads without failure of services.
SCT-Brake Pads and Brake Shoes are laid out to the present means of transport accordingly, so that equally constant capacity of brake power under different temperature and other conditions is guaranteed, without any difference whether it goes about braking at high speeds on a high-speed automobile highway or around Stop-and-go-driving in city. They are compatible with ABS and also TCS, EBD and ASC and meet the O.E.-specifications. Each complete set of facing represents best possible combination what merit, passenger comfort and handling are concerned. During the manufacturing of brake shoes was paid a special attention in order to find the best coordination of disc brake pads in the forward axle, owing to that potential dangers such as blocking of rear wheels will be prevented.
In our program there are brake pads and brake shoes not only for passenger cars, but also for light and heavy utility vehicles. They are concepted for reduction of a care and conditional - constant costs of car owners and optimum profitability.
Motor oils for cars and transporters
Modern engine oils are based on several basis oils depending on their type or productivity. Additionally we use several additive packets. It was a developed unique oil program, which makes lubrication suitable for all engines.
Low viscosity engine oils
7918 Legend Ultra 0W-20 API SP (RC) Legend Extra 0W-30 API SN Plus Legend+Ester 0W-40 API SN/CH-4 Energy Ultra JP 5W-20 API SN Diesel TDI 5W-30 API SN/CH-4 Energy Combi LL 5W-30 API SN 7917 Energy Formula C4 5W-30 API SN Energy Formula JP 5W-30 API SN Plus Energy Premium 5W-30 API SN/CH-4 Diesel Turbo 5W-40 API CI-4/SN Elite 5W-40 API SN/CH-4 Energy Formula PD 5W-40 API SN Extreme 5W-40 API SN/CH-4 Stahlsynt Ultra 5W-50 API SN/CF Racing+Ester 10W-60 API SN/CH-4 Energy 5W-30 API SN/CH-4 Premium engine oils 7512 Special Plus 10W-30 API SN Classic 10W-40 API SN/CH-4 Defender 10W-40 API SN Diesel Extra 10W-40 API CH-4/SN Gasoil Extra 10W-40 API SL/CH-4 Molibden Benzin 10W-40 API SN/CH-4 Molibden Diesel 10W-40 API CG-4/SL Nano Technology 10W-40 API SN/CH-4
Special 10W-40 API SN/CH-4
Favorit 15W-50 API SL/CH-4 Special engine oils 7701 O.E.M. 5W-30 API SN Plus 7702 O.E.M. 10W-40 API SN/CH-4 7703 O.E.M. 5W-30 API SN/CH-4 7705 O.E.M. 5W-40 API SN/CH-4 7706 O.E.M. 5W-30 7707 O.E.M. 5W-30 API SN 7709 O.E.M. 5W-30 API SN Plus 7711 O.E.M. 5W-40 API SN 7713 O.E.M. 5W-30 API SN/CH-4 7715 LONGLIFE 504/507 API SN 7717 O.E.M. 0W-30 API SN/CH-4 7719 O.E.M. 0W-40 API SN/CF 7721 O.E.M. 0W-20 API SP (RC) 7723 O.E.M. 5W-30 API SN/CH-4 7725 O.E.M. 5W-30 API SN Standard engine oils Diesel 15W-40 API CH-4/SN Standard 15W-40 API SL/CF Universal 15W-40 API SN/CH-4 Gasoil 15W-50 API SG/CD Safari 20W-50 API SN/CH-4
Motor oils for cars and transporters
Modern engine oils are based on several basis oils depending on their type or productivity. Additionally we use several additive packets. It was a developed unique oil program, which makes lubrication suitable for all engines.
Spark plugs
CLASSIC
Wheel bearing
Wheel bearings
Aerotech Multiflat serie
Windscreen wipers SCT-GERMANY series AEROTECH MULTIFLAT
Brake shoes
SCT-Brake Pads are spare part pads with excellent price-quality ratio. The raw materials used in manufacturing of brake pads are chosen according following features: stability, efficiency and capacity of braking. The purpose is to offer a complete range of cost-efficient brake pads without failure of services.
SCT-Brake Pads and Brake Shoes are laid out to the present means of transport accordingly, so that equally constant capacity of brake power under different temperature and other conditions is guaranteed, without any difference whether it goes about braking at high speeds on a high-speed automobile highway or around Stop-and-go-driving in city. They are compatible with ABS and also TCS, EBD and ASC and meet the O.E.-specifications. Each complete set of facing represents best possible combination what merit, passenger comfort and handling are concerned. During the manufacturing of brake shoes was paid a special attention in order to find the best coordination of disc brake pads in the forward axle, owing to that potential dangers such as blocking of rear wheels will be prevented.
In our program there are brake pads and brake shoes not only for passenger cars, but also for light and heavy utility vehicles. They are concepted for reduction of a care and conditional - constant costs of car owners and optimum profitability.
Gear oils & transmission fluids
Gearbox imparts torque between engine and drive shaft. In gearboxes like control gear and automatic transmission cares gearbox oil for frictionless cooperation of the gear wheels. The task for gearbox oils is to lubricate the gearbox parts, cooling through heat removal, to protect against corrosion and hydraulic steering of the switching operation by automatic transmissions.
Gearbox oils are graded in classes GL 1 to GL 5 at what where GL 5 has the highest quality.
There is an ATF (Automatic Transmission Fluid) specifically for automatic transmission. It’s task is to transfer the pressure. The specifications for automatic transmissions oils are Mercon from Ford and Dexron from GM. The specifications of another gearbox producers take that over, intensify or extend them.
Automatic transmission fluids
ATF AG52 Automatic Special ATF AG55 ATF AG60 Dexron II Automatic Dexron III Automatic Plus Dexron VI ATF Multivehicle CVT Variator Fluid O.E.M. 8208 O.E.M. 8209 for Korean cars ATF SP-III O.E.M. 8215 O.E.M. 8216 for CVT O.E.M. 8217 ATF WS O.E.M. 8218 Multivehicle JWS O.E.M. 8219 ATF SP-IV O.E.M. 8220 CVT NS-3 Gear oils 8109 Unigear 75W-80 API GL-4/GL-5 LS 8110 Agro Gear 90 LS API GL-5 LS (Limited Slip) 8111 TG-1 Universal 75W-80 API GL-4 8112 TG-2 Hypoid 75W-90 API GL-4/GL-5 8202 DCT Fluid Gear Oil ISO 220 Maxpower 4x4 75W-140 API GL-5 LS (Limited Slip) Extra Getriebeoel 75W-90 API GL-4 MTF-4 Getriebeoel 75W-80 API GL-4 Hypoid Getriebeoel 80W-90 API GL-4/GL-5 LS (Limited Slip) Basic Plus 75W-90 API GL 4+ FWD Getriebeoel 75W-85 API GL-4 Universal Getriebeoel 80W-90 API GL-4 Hypoid LSD 85W-140 API GL-5 LS (Limited Slip)
Gear oils & transmission fluids
Gearbox imparts torque between engine and drive shaft. In gearboxes like control gear and automatic transmission cares gearbox oil for frictionless cooperation of the gear wheels. The task for gearbox oils is to lubricate the gearbox parts, cooling through heat removal, to protect against corrosion and hydraulic steering of the switching operation by automatic transmissions.
Gearbox oils are graded in classes GL 1 to GL 5 at what where GL 5 has the highest quality.
There is an ATF (Automatic Transmission Fluid) specifically for automatic transmission. It’s task is to transfer the pressure. The specifications for automatic transmissions oils are Mercon from Ford and Dexron from GM. The specifications of another gearbox producers take that over, intensify or extend them.
Gear oils & transmission fluids
Das Getriebe – mit seiner Hilfe vermittelt der Fahrer Drehzahlen und Drehmomente zwischen Motor und Antriebsachse. In Getrieben wie Schalt-, Automatik-, Verteiler und Achsgetriebe sorgt Getriebeöl für möglichst reibungslose Zusammenarbeit der Zahnräder. Die Aufgabe des Getriebeöls ist die Schmierung der aufeinander gleitenden und abrollenden Teile, die Kühlung durch Wärmeabfuhr, Kraftübertragung an den Zahnflanken, der Korrosionsschutz und die hydraulische Steuerung der Schaltvorgänge bei Automatik getrieben. Getriebeöle sind nach API Spezifikation in die Klassen GL 1 bis GL 5 eingeteilt, wobei GL 5 die höchste Qualität hat. Speziell für die Automatik gibt es ATFs (Automatic Transmission Fluid), deren Hauptaufgabe die Druckübertragung ist. Als Spezifikationen für die Automatik-Getriebeöle gelten Mercon von Ford und Dexron von GM. Die Spezifikationen anderer Getriebehersteller übernehmen, verschärfen oder erweitern diese.
Glow plugs
SCT TURBO POWER
Motor oils for trucks and buses
Engines of utility vehicles and mixed car pools need specific based oils and additive combinations because they work under hard conditions. Pemco DIESEL G and DIESEL M - products, which excel requirements of most car manufacturers as well as American and European service standards. They are based on high quality ground oils in order to give optimal viscosity and oxidation protection by longer oil change intervals and different temperatures what avoids soot and debrises in engine. The used usage of anti-oxidation tools succesfully privents ageing and warp formation.
Oil filters
Engine oil lubricates all the moving and functional parts in the engine. As a result of combustion, particles of dirt and combustion residue such as soot get into the engine oil. They contaminate the oil and make it more viscous. This means that the oil supply is not adequate and protection from corrosion can no longer be ensured. As a result, engine performance is impaired and fuel consumption increases. In the worst case, the engine could be damaged.
Increasing engine performance and at the same time reducing fuel consumption places high demands on engine building. Only clean oil can ensure that engine performance remains consistent. This is where the full effectiveness of SCT filters is really brought to bear.
Recommended oil filter replacement: 15.000 km. Oil filter delays aging of the the oil and causes a long-life period of maintenance. This means an important decrease in maintenance cost and an increase in the performance with a safe work. There are two types of oil filter production: Element Type Oil Filters and Spin-On Type Oil Filters. There are also differences in spin-on type oil filters: 1) Full -Flow Filters - they are settled in oil circulation to filter all of the oil. By this way the damage of the particles in lubrication area is prevented. 2) By-Pass Filters: By-pass filters strain 5-10% of the oil in system by absorbing it from oil circulation They are used in diesel engines. The filter paper used in full-flow filter is not appropriate for by-pass filter. A special type filtration material is used.
SCT Vertriebs GmbH is also very active in the production of transmission oil filters.
Shock Absorbers
The SCT-Shock Absorbers are specially developed to provide a smooth, secure ride with excellent control for drivers who are looking for ride comfort and improved handling. It provides comfort and control that is often better than original equipment. Even under extreme conditions the SCT- Shock Absorbers offer an extra high reliability and life expectancy.
V-Belts
V-belts
Fuel filters
The basic requirement for problem-free motoring is clean fuel. The fuel arrives in the injection system or in the carburettor via the fuel pump. Particularly in modern injection systems, dirt particles in the fuel cause increased wear. The water contents in the fuel can also cause serious damage as a result of corrosion. At worst, this can result in the complete failure of the injection system, bringing the vehicle to a standstill. Wear on the injection system or on the carburettor results in a considerable increase in fuel consumption and in impaired engine performance.
The importance of the filtration with high pressures increases gradually in the injection elements that obtain a work without any problem by holding the particles outside of the system.
Fuel filters supply the safe work and protection of the injection system and carburetor. There are two types of fuel filters: 1) Element Type Fuel Filter - they are assembled to engine in a protector and changed while maintenance. They are used for diesel engines.
2) Spin-On Type Fuel Filters - they consist of a filter element and a case.
According to the filtration capability felt, filter paper and creep paper are used as filtration material. By playing the most important role in the clearance of the fuel, the fuel filters decrease the given harm to environment.
Hybrid serie
Windscreen wipers SCT-GERMANY Series HYBRID
Ignition wire sets
Ignition wire sets
Motor oils for motorbikes and outboard engines
Engine oils for motorbikes are high-quality products with excellent effective stroke additive based on very good basis oils. This combination gives the following results - immaculate lubrication of all engine parts, strong cleaning effect, spark plugs stay clean that helps to provide the optimal power output of the engine, very high protection against wearout and corrosion, less exhaust gas.
Operating and service fluids
The hydraulic fluid’s task is to transfer pressure and motion with a less loss, to avoid friction and wearout, to protect against corrosion, leading away heat with energy conversion and to seal up between car parts. The property of fluid and its condition are very important for long life cycle and optimal efficiency factor of hydraulic systems.
A/C system fluids
9891 PAG 46 Refrigerant oil Brake fluids Brake Fluid DOT-4 Air Brake Antifreeze Coolant fluids AF13++ -40°C Antifreeze (High-performance) AF13++ Antifreeze (High-performance) AG11 Antifreeze (Longterm) AG11 -40°C Antifreeze (Longterm) AF12+ Antifreeze (Longlife)
AF12+ -40°C Antifreeze (Longlife)
AG13 Antifreeze (Hightec) AG13 -40°C Antifreeze (Hightec) AG13+ Antifreeze (Advanced) AG13+ -40°C Antifreeze (Advanced) Gear oils and hydraulic fluids LDS Fluid LHM+ Fluid 8970 Power Steering Fluid 8980 Power Steering Fluid 8990 Central Hydraulic Fluid ATF-A PSF
Operating and service fluids
Die Aufgaben der Hydraulikflüssigkeiten Betriebsflüssigkeiten sind die ist es Druck, Temperatur und Bewegungsübertragungen bei geringsten Verlusten, Verminderung von Reibung und Verschleiß, Schutz vor Korrosion, Abführung der Wärme bei Energieumwandlung und das Abdichten zwischen den Maschinenelementen. Die Eigenschaften der Flüssigkeit und deren Zustand sind mitentscheidend für eine lange Lebensdauer und einen optimalen Wirkungsgrad Funktionsfähigkeit des Motors Hydrauliksystems.
R-Belts
R-belts
Spare parts for Lada & Logan
SCT-GERMANY parts for LADA and Logan
Automotive bulbs
The light is very important for safety of traffic. Better see and being seen helps to avoid the accidents. In addition to it the theme "Light" becomes more and more important element of design, by which differentiate the cars from each other.
Advantages of SCT-Automotive Bulbs:
1) High lightning power
2) High output of effective light 3) Low heating
4) Long life
Classic serie
With SCT windscreen wipers have client highest wiping quality, innovative design and maximum comfort to favourable cost. SCT windscreen wipers guarantees best view and maximum safety through innovative engineering.
Strong holder is resestant against influence of meteorological conditions. Extra soft back of wash gum cares high flexibility for especially equable and quiet movement without rubble and squeaking - whether there is a rain, there is a snow or hail. The wish blade cares for cleane cleaning for the whole life. It fixes with universal adapter, so you du not need a long search for right installation tools. For fast cars are designet windscreen wipers with spoiler, which cares for better pressure at high speed. Advantages of SCT-Windscreen wipers: 1) Excellent wish quality 2) No lifting and vibration 3) Wash without streaks
4) Fast installation 5) Good price-quality ratio
Gear oils and transmission fluids
Gearbox imparts torque between engine and drive shaft. In gearboxes like control gear and automatic transmission cares gearbox oil for frictionless cooperation of the gear wheels. The task for gearbox oils is to lubricate the gearbox parts, cooling through heat removal, to protect against corrosion and hydraulic steering of the switching operation by automatic transmissions.
Gearbox oils are graded in classes GL 1 to GL 5 at what where GL 5 has the highest quality.
There is an ATF (Automatic Transmission Fluid) specifically for automatic transmission. It’s task is to transfer the pressure. The specifications for automatic transmissions oils are Mercon from Ford and Dexron from GM. The specifications of another gearbox producers take that over, intensify or extend them.
Interior filters
The air in urban areas contains large quantities of dust, pollen, soot and other particles, as well as gases which are harmful to health. More and more people are suffering from allergies and are increasingly aware of the subject of air conditioning and cabin filters. As a result, more vehicles leave the factory already fitted with cabin filters.
The particle filter keeps dust and particles such as pollen, diesel soot or tyre dust away from the interior of the vehicle. It is important to obtain the maximum possible filtration performance in the space available. Through the special pleating technique, the actual filtration area is increased without having to change the size of the filter. Laboratory tests confirm that up to 95% of dust particles and pollen are almost completely retained.
Motor oils for trucks, buses etc.
Engines of utility vehicles and mixed car pools need specific based oils and additive combinations because they work under hard conditions. MANNOL Truck Special - products, which excel requirements of most car manufacturers as well as American and European service standards. They are based on high quality ground oils in order to give optimal viscosity and oxidation protection by longer oil change intervals and different temperatures what avoids soot and debrises in engine. The used usage of anti-oxidation tools succesfully privents ageing and warp formation.
Low viscosity engine oils
TS-21 SHPD 10W-30 API CJ-4/CI-4 Plus Low viscosity engine oils TS-14 UHPD 15W-40 API CK-4 TS-6 UHPD Eco 10W-40 API CI-4 TS-7 UHPD Blue 10W-40 API CK-4/CJ-4 TS-8 UHPD Super 5W-30 API CI-4 TS-17 UHPD Blue 5W-30 API CK-4 TS-18 15W-40 CK-4 API CK-4 TS-20 SHPD 10W-30 API CJ-4/CK-4 Premium engine oils TS-5 UHPD 10W-40 API CI-4 Plus
TS-9 UHPD Nano API CJ-4/SN
TS-12 SHPD 10W-30 API CI-4 Plus Standard engine oils TS-1 SHPD 15W-40 API CH-4/SL TS-15 SHPD 20W-50 API CI-4 Plus TS-2 SHPD 20W-50 API CH-4/SL TS-3 SHPD 10W-40 API CH-4/SL TS-4 SHPD 15W-40 API CI-4 Plus TS-11 SHPD 15W-40 Geo
Timing-belts
Timing belts
Air-drying boxes for trucks
On the subject of safety, brakes are amongst the most important components of a vehicle. Pneumatic braking systems on trucks and buses must be protected from corrosion to ensure efficient operation. To achieve this, a dry, clean pneumatic operating system is of critical importance.
The air drying box ensure maximum operating safety of the brake system since dry air is the only reliable way to prevent corrosion and freezing in the pressure brake system. This filter filters out dirt particles and oil and provides optimum air drying performance.
Automotive fuses
A fuse interrupts excessive current. Thereby further damage by overheating or fire is prevented. The essential component of a fuse is the metal wire that melts when too much current flows. For this part of our fuses we use zinc alloy and for the body we use PC resin. The raw materials are from Germany, the USA and Japan. All products are manufactured according to the Quality Management System ISO/TS 16949.
Right now we have three different kinds of automotive fuses in our range: GBC, ATN and ATS.
Oils for motorbikes, outboard engines etc.
Engine oils for motorbikes are high-quality products with excellent effective stroke additive based on very good basis oils. This combination gives the following results - immaculate lubrication of all engine parts, strong cleaning effect, spark plugs stay clean that helps to provide the optimal power output of the engine, very high protection against wearout and corrosion, less exhaust gas.
Garden equipment oils
7858 Agro Formula S API TC 7859 Agro HSQ API TC Kettenoel 4-Takt Agro SAE 30 API SL Agro API TC Motorcycle oils 4-Takt Plus API SL 7209 4-Takt Premium API SN 7804 Scooter 2-Takt API TC 7805 Scooter 2-Takt Premium API TC+ 7807 Quad 4-Takt Racing API SL/CF 7809 Scooter 4-Takt API SL
7812 Motorbike 4-Takt API SN
7830 Motorbike 4-Takt HD API SN 7832 4-Takt Powerbike API SN 2-Takt Plus API TC 2-Takt Universal API TC Outboard motors oils 7818 Outboard 2-Takt Premium API TC 7820 Aqua Jet 4-Takt API SL Outboard Marine API TC Outboard Universal API TC Snowmobile oils 2-Takt Snowpower API TC+
Oils for motorbikes, outboard engines etc.
Engine oils for motorbikes are high-quality products with excellent effective stroke additive based on very good basis oils. This combination gives the following results - immaculate lubrication of all engine parts, strong cleaning effect, spark plugs stay clean that helps to provide the optimal power output of the engine, very high protection against wearout and corrosion, less exhaust gas.
Oils for motorbikes, outboard engines etc.
Bei den Motorrad- und Außenborder-Motorenölen handelt es sich um hochwertige Produkte, die auf sehr guten Grundölen basieren und mit außerordentlich wirksamen Additiven versetzt sind. Diese Kombination ergibt eine einwandfreie Schmierung aller Motorenteile und eine starke Reinigungswirkung. Die Verbrennungsräume sowie die Ein- und Auslasskanäle werden weitestgehend von Verbrennungsrückständen und Ablagerungen freigehalten, die Zündkerzen bleiben sauber und sorgen damit für optimale Leistung der Motoren. Die Öle stellen sehr hohen Verschleiß- und Korrosionsschutz sowie eine geringe Abgasbelastung durch gute Verbrennung sicher.
Operating and service fluids
The hydraulic fluid’s task is to transfer pressure and motion with a less loss, to avoid friction and wearout, to protect against corrosion, leading away heat with energy conversion and to seal up between car parts. The property of fluid and its condition are very important for long life cycle and optimal efficiency factor of hydraulic systems.
Trucks and buses serie
Windscreen wipers SCT-GERMANY for trucks and buses
The rangeof windscreen wipersSCT-GERMANY for trucks and buses cover a wide demand for modelsvans. Dimensionswindscreen wipersSCT-GERMANYvaryin lengthup to 40 inches, till 1,000millimeters. Windscreen wipersSCT-GERMANYfor trucks andbusesevenlyand efficientlypurifythe covered surfaceis notonly flat,but also curvedfromvarious contaminants. Natural rubberwith the addition ofgraphiteused for the manufactureof brushesSCT-GERMANY,has excellentwear resistance,it does not freezein low temperatures, does not dryin the sun andis resistant tochemicals.The rubberelementsbrushesSCT-GERMANYperfectlycleancar windows do not leave streaksanddo not emitsqueaks.
Industrial Oils
Industrial lubricants are oils that with an effect of special additives meet requirements of various machine-tools and mechanical units.
By meeting requirements of machine-tools, lubricants are used as transmission, rail, slitter and hydraulic oil, as well as to grease central lubrication system. Mannol industrial oils are used in wide range of application and preserve in long term period reliable lubricity, which in extreme condition ensures you reliable lubricating environment. Excellent properties of oils not only correspond to high standards of industrial machinery manufacturers, but even exceeding them.
Compressor oils
Compressor Oil ISO 100 Compressor Oil ISO 150 Compressor Oil ISO 46 Engine oils for heavy loads SAE 40 API CH-4/SJ SAE 50 API CH-4 SAE 60 API CH-4 M.O. SAE 10W API CH-4 M.O. SAE 20W API CF M.O. SAE 30 API CH-4 M.O. SAE 40 API CH-4 Hydraulic oils Hydro HV ISO 32
Hydro HV ISO 46
MN Hydro HV ISO 46 Zinc Free Hydro HV ISO 68 Hydro ISO 100 Hydro ISO 150 Hydro ISO 32 Hydro ISO 46 Hydro ISO 68 Oils for pre-treatment Flushing Oil Turbine oils Turbine 32 Turbine 46 Turbine 68
Industrial Oils
Industrial lubricants are oils that with an effect of special additives meet requirements of various machine-tools and mechanical units. By meeting requirements of machine-tools, lubricants are used as transmission, rail, slitter and hydraulic oil, as well as to grease central lubrication system. Fanfaro industrial oils are used in wide range of application and preserve in long term period reliable lubricity, which in extreme condition ensures you reliable lubricating environment. Excellent properties of oils not only correspond to high standards of industrial machinery manufacturers, but even exceeding them.
Industrial oils
Industrial lubricants are oils that with an effect of special additives meet requirements of various machine-tools and mechanical units. By meeting requirements of machine-tools, lubricants are used as transmission, rail, slitter and hydraulic oil, as well as to grease central lubrication system. Pemco industrial oils are used in wide range of application and preserve in long term period reliable lubricity, which in extreme condition ensures you reliable lubricating environment. Excellent properties of oils not only correspond to high standards of industrial machinery manufacturers, but even exceeding them.
Industrial Oils
Industrial lubricants are oils that with an effect of special additives meet requirements of various machine-tools and mechanical units. By meeting requirements of machine-tools, lubricants are used as transmission, rail, slitter and hydraulic oil, as well as to grease central lubrication system. Chempioil industrial oils are used in wide range of application and preserve in long term period reliable lubricity, which in extreme condition ensures you reliable lubricating environment. Excellent properties of oils not only correspond to high standards of industrial machinery manufacturers, but even exceeding them.
Oils for agricultural machinery
Standard engine oils
Multi UTTO WB 101 API GL-4 TO-4 Powertrain Oil SAE 10W TO-4 Powertrain Oil SAE 30
TO-4 Powertrain Oil SAE 50
Traktor Superoil API SG/CD Multifarm STOU 10W-30 API CG-4/CF-4/CF/CE/CD/SF Multifarm STOU 10W-40 API CG-4/CF-4/CF/CE/CD/SF
Greases
It is difficult to over rate importance of greasing materials for modern technology. Only correct selection of greasing materials guarantees you smooth operation of any type mechanisms. SCT offers you wide range of products, from which you can select greasing materials ideally suitable for specific mechanism and various operating conditions.
Other greases
MN Emulsion LC-2 High Temperature Grease EP-2 Multi-MoS2 Grease MP-2 Multipurpose Grease
WR-2 Long Term Grease
Li-EP-00/000 Low Viscosity Grease 8121 White Grease 8025 Brake Grease 9896 Kupferpaste
Fuel additives
Diesel fuel additives
9694 DPF Foam Cleaner 9995/9996 DPF Regenerator & Flush Fluid DPF Cleaner ready-to-use AdBlue® 9980 Diesel Jet Cleaner 9984 Diesel Plus 9988 Super Diesel Cetan Plus
Winter Diesel
Petrol fuel additives Catalytic System Cleaner 9981 Injector Cleaner 9669 Motor Starter 9989 Super Benzin Oktan Plus |